ABSTRACT Integrated nutrient management (INM) is an environment friendly and ecologically adoptable approach of plant nutrition to sustain crop productivity and maintain soil fertility of fragile agricultural ecosystems. A three-year field experiment on saffron was conducted involving 12 fertilization regimes: control; urea (UN) = 100 kg·ha-1; poultry manure (PM) = 100 kg·ha-1; farmyard manure (FYM) = 100 kg·ha-1; PM50 + FYM50; UN75 + PM25; UN50 + PM50; UN25 + PM75; UN75 + FYM25; UN50 + FYM50; UN25 + FYM75; and UN50 + PM25+ FYM25. Results showed that PM alone and combined with 50% UN (UN50 + PM50) were effective compared to the controls in increasing the number of flowers (58%), flower dry weight (59%), stigma length (70%), dry weight of stigma (40%), number of daughter corms plant-1 (35%), and corm diameter (71%) of saffron over years. In addition, the same treatment combination increased corm weight (96%), corm yield (96%), and stigma yield (35%) over controls across the years. This treatment combination was followed by UN50 + PM25 + FYM25, while UN50 alone did not perform at par to the rest of the fertilization regimes. These results showed that UN50 + PM50 might be developed as potent strategy for boosting the growth and yield (stigma and daughter corms yield) of saffron in temperate climatic conditions.

Abstract Pregabalin, a GABA analogue is used to treat epilepsy and neuropathic pain. The drug poses problems in analytical quantification when estimated at a shorter UV wavelength. The expensive and non-repetitive reported analytical methods necessitate the utility and development of an accurate, precise, repetitive, simple and highly sensitive colorimetric method for pregabalin in solution as well as sustained release mini matrices. Pregabalin (having primary amino group) was derivatized at alkaline pH of mixture with optimized ninhydrin solution at ambient temperature (25oC). The ninhydrin-pregabalin derivatized complex (Ruhemann’s Purple) was analyzed for drug concentration at absorption maximum (λmax) of 570nm. The linearity was observed in the concentration range of 5-150 µg/mL with coefficient of correlation, 0.998. The developed analytical method was validated according to ICH guidelines and proved to be highly sensitive (LOD 0.917µg/mL, LOQ 3.055µg/mL), with good inter-day as well as intra-day accuracy and precision as 4.65% and 3.75%, respectively. The proposed method was proved to be a simple, sensitive, precise and accurate for the estimation of the minute concentrations of pregabalin in pure form and the developed formulations. Results verified that the proposed method could determine pregabalin at the ambient temperature without requiring high temperatures used in the existing methods. It was concluded that developed method was easier and more suitable for analysis of pregabalin in quality control of commercial preparations.

ABSTRACT Drinking water quality is considered to be of vital importance for all human beings and animals but its significance is much more heightened when consumer is a teenager. In view of foregone, groundwater quality assessment of 150 public schools situated in flooded areas of Southern Punjab, Pakistan, was carried out. Analysis results revealed that 49 and 37 % water samples are contaminated with coliform and faecal coliforms, respectively. On the other hand chemicals constituents in samples, including calcium (43 %), magnesium (11 %), potassium (37 %), sodium (31 %), sulphate (39 %), hardness (31 %), total dissolved solids (TDS) (35 %) and chloride (15 %) were higher than World Health Organization (WHO) limits. The situation is more serious as fluoride, iron and arsenic were also found in high concentration in 15, 60 and 58 % samples, respectively. Health risk assessment data indicated that mean chronic daily intake (CDI) values for children and adults were 0.592 and 0.537 μg/kg/day for arsenic and 0.012 and 0.011 μg/kg/day for iron, respectively. Calculated arsenic health risk index (HRI) > 1 for 88 and 58 % water samples for children and adults respectively, which highlights possible health risks associated with intake of contaminated water.

RESUMEN La calidad del agua potable se considera de vital importancia para todos los seres humanos y animales, pero su importancia aumenta mucho más cuando el consumidor es un adolescente. En vista de lo anterior, se llevó a cabo una evaluación de la calidad de las aguas subterráneas de 150 escuelas públicas ubicadas en áreas inundadas del sur de Punjab, Pakistán. Los resultados del análisis revelaron que 49 y 37% de las muestras de agua están contaminadas con coliformes y coliformes fecales, respectivamente. Por otro lado, los componentes químicos en las muestras que incluyen calcio (43 %), magnesio (11 %), potasio (37 %), sodio (31 %), sulfato (39 %), dureza (31 %), sólidos disueltos totales (TDS) (35 %) y cloruro (15 %)en 43, 11, 37, 31, 39, 31, 35 y 15% de las muestras fueron mayores que los límites de la Organización Mundial de la Salud (OMS). La situación es más ya que el fluoruro, el hierro y el arsénico también se encontraron en altas concentraciones en 15, 60 y 58% de las muestras, respectivamente. Los datos de evaluación de riesgo para la salud indicaron que los valores medios de ingesta crónica diaria (CDI, por sus siglas en inglés) para niños y adultos fueron de 0.592 y 0.537 μg/kg/día para arsénico y 0.012 y 0.011 μg/kg/día para el hierro, respectivamente. El índice de rieso, calculado para el arsénico, (HRI, por sus siglas en inglés) fue > 1 para 88 y 58% de muestras de agua para niños y adultos, respectivamente, lo que destaca los posibles riesgos para la salud asociados con la ingesta de agua contaminada.

Abstract Multi-walled carbon nanotubes (CNTs) and zeolitic imidazole frameworks (ZIF-301) were synergistically incorporated into glassy polysulfone (PSF) to prepare mixed-matrix membranes (MMMs) to separate CO2 from post combustion flue gas. The flexible MMMs rendering consistent distribution and improved adhesion of nanofillers with the polymer matrix were hydrothermally stable under wet conditions. Gas sorption analysis along with dry and wet gas permeation experiments showed that both CO2 permeability and CO2/N2 selectivity of MMMs were improved owing to the synergistic effect of nanofillers. The MMM filled with 18 wt % ZIF-301 nanofillers and 6 wt % CNTs showed an optimum separation performance by providing a CO2 permeability of 19 Barrers with a CO2/N2 selectivity of 48. The CO2 separation performance of MMMs prepared in this work was found to be better than those of already existing hydrothermally stable MMMs.

RESUMOO flurbiprofeno, potente anti-inflamatório não esteroidal, é amplamente utilizado no alívio da dor de pacientes que possuem doenças reumáticas, enxaqueca, dores de garganta e dismenorreia primária. Entretanto, apresenta muitos efeitos gastrointestinais indesejáveis quando administrado por via oral como hemorragia gástrica e úlcera péptica. Esses efeitos foram responsáveis por baixa adesão entre os pacientes, o que resulta no comprometimento do tratamento. As propriedades físico-químicas do flurbiprofeno fazem dele um candidato promissor para a administração transdérmica, que pode eliminar os inconvenientes causados durante a administração oral. Neste sentido, provou-se que as microemulsões aumentam a absorção cutânea de fármacos lipofílicos quando comparadas aos sistemas de liberação convencionais. O objetivo desse estudo foi desenvolver e caracterizar géis bases contendo microemulsões de flurbiprofeno. Diferentes géis bases contendo microemulsão e solução hidroalcoólica de flurbiprofeno foram desenvolvidos e comparados. Os estudos in vitroindicaram que os géis contendo microemulsão apresentaram velocidade de permeação superior ao géis contendo as soluções hidroalcoólicas. Adicionalmente, a formulação de Carbopol -I (microemulsão) apresentou maior capacidade de inibição da inflamação em relação às outras bases. Além disso, o estudo demonstrou que formulação de Carbopol -I (microemulsão) não ocasionou irritações cutâneas. Desta forma, o gel base de Carbopol -I contendo microemulsão de flurbiprofeno apresentou características físico-químicas, desempenho in vitro e in vivo adequados para o desenvolvimento de formulação alternativas de liberação transdérmica.

ABSTRACTFlurbiprofen, a potent nonsteroidal anti-inflammatory drug, is widely used for relief of pain in patients suffering from rheumatic diseases, migraine, sore throat and primary dysmenorrheal. However, this drug has many gastrointestinal side effects produced by its oral administration, such as gastric bleeding and peptic ulcer. These effects were responsible for non-compliance among patients, which ultimately results in treatment failure. The physicochemical properties of flurbiprofen, make it a suitable candidate for transdermal drug delivery, which can overcome the drawbacks of oral administration. In this sense, microemulsions have been proved to increase the cutaneous absorption of lipophilic drugs when compared to conventional drug delivery systems. The purpose of this study was to formulate and characterize gel based microemulsions, for topical delivery of flurbiprofen. Different gel bases, containing microemulsion and hydro-alcoholic solution of flurbiprofen, were developed and compared. In vitro study showed that gels containing microemulsion had a higher permeation rate than those containing hydro-alcoholic solutions. Additionally, formulation of Carbopol-I (microemulsion) showed higher percent of inhibition of inflammation than others bases. Further, skin irritation study demonstrated that Carbopol-I was none irritating. Flurbiprofen microemulsion incorporated on Carbopol-I showed physicochemical, in vitro and in vivo characteristics suitable for the development of alternative transdermal delivery formulation.